This increases the turn around time for scopes and devices, thereby increasing operational efficiency of the hospital.
METALS | PLASTICS | ELASTOMERS | ADHESIVES |
---|---|---|---|
Aluminium | Polymethylmethacrylate (Acrylic) | Polychloroprene (Neoprene) | EPO-TEK 301 |
Anodized aluminium | Nylon1 | Kraton G1 | Epoxy3 |
Brass | Polyethylene terephthalate (Polyester) | Polyurethane | EPO-TEK 353ND |
Carbon steel | Polyester | Silicone rubber | Epoxy |
Chrome plated brass | Polyvinylchloride (PVC) | Natural rubber latex 1 | |
Chrome plated steel | Acrylonitrile/butadiene/styrene (ABS) | ||
Copper | Polysulfone & Polycarbonate | ||
Nickel sliver alloy | Polyethylene | ||
Stainless steel | Polypropylene | ||
Titanium | Acetal & PTFE | ||
Tungsten carbide | Polyamide |
Mi-OPA is safe for patients and health care professionals.
Re-processing using Automatic Endoscope Re-processor: Set the temperature to 25deg C with an immersion time of 5 minutes.
After removing the device from Mi-OPA, wash it thoroughly with large volume of water Use sterile water if required.
- Store at controlled room temperature, 15deg to 30deg C.
- For external use only
- Keep soaking trays covered at all times
- Avoid direct contact with skin,eyes and clothing
- Wear personal protective gear like rubber gloves, eye shield while handling
- Wash thoroughly with soap and water after handling
- Flush eyes with fresh water in case of contact
- In case of emergency, seek medical help
- Keep out of reach of children
Reviews
There are no reviews yet.