Product name
TERUFUSION Infusion Pump Type LF
Model
TE-LF600
Flow rate setting range
• Setting range
3.00 to 300.00 mL/h (when setting is 20 drops/mL)
1.00 to 100.00 mL/h (when setting is 60 drops/mL)
• Step
1.00 mL/h step*
*: Step can be used when ow rate is set by the Dial. (It will be 0.00 mL/h when the power is turned on.)
Flow rate accuracy
Within ±10%
(The hourly precision after one hour has passed since the start of solution delivery, in the case where water or a physiological saline solution is used at a constant ow rate of minimum ow rate or more (ambient temperature: 23±2°C) according to IEC 60601-2-24 standard.)
Within ±5%
(The hourly precision after one hour has passed since the start of solution delivery, in the case where water or a physiological saline solution is used with TERUFUSION Solution Administration Set (T_Grav.) at minimum ow rate (20 drops/mL: 3.00 mL/h or 60 drops/mL: 1.00 mL/h) or middle ow rate (25.00 mL/h) (ambient temperature: 23±2°C, drop between infusion bag and pump: 50 cm, and drop between pump main body and puncture site: None) according to IEC 60601-2-24 standard.)
Occlusion detection pressure
• Upper occlusion detection pressure -100 to -30 kPa
• Lower occlusion detection pressure
30 to 120 kPa(set value)
The lower occlusion detection pressure can be set in 10 levels.
Purge ow rate
Approx.300 mL/h or more (depending on the infusion set to be used)
Alarms
Upper Occlusion alarm, Lower Occlusion alarm, Air-in-line alarm, Door alarm, Flow Rate Abnormality alarm, Free Flow alarm, Line Empty alarm, Battery alarm, Re-alarm, Start Reminder, No Flow Rate alarm, No VTBI alarm, Flow Rate/VTBI Volume Judgment alarm, Completion alarm
Safety functions
Occlusion detection pressure select function, Air-in-line alarm sensitivity select function, Tube clamp function, Flow rate range setting function A (Soft limits), Flow rate range setting function B (Hard limits), Key lock function
Use conditions
Ambient temperature: 5 to 40°C*
Relative humidity: 20 to 90%RH (non-condensing)
*: Flow Rate Abnormality alarm may be issued under approx. <10°C at a ow rate of approx. 50mL/h or more when using TERUFUSION Solution Administration Set (T_Grav.).
Storage conditions
Ambient temperature: -20 to 45°C
Relative humidity: 10 to 95%RH (non-condensing)
Power supply
AC100 to 240V, 50 to 60Hz
Internal battery (lithium ion battery)
• Continuous use period: Approx. 5 hours (applies when solution is delivered continuously at 25 mL/h in ambient temperature of
25°C with new fully charged battery)
• Charging time: ≥ 8 hours (when charged with AC power supply with the power turned off)
Power consumption
28VA
Classi cation
Class I equipment and internally powered equipment, type CF applied part, Continuous Operation, IP22 (Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position.)
Dimensions
Without external communication (RS-232C):
253 mm (W)*1 x 120 mm (H)*1 x 102 mm (D)*2
With external communication (RS-232C):
253 mm (W)*1 x 120 mm (H)*1 x 121 mm (D)*2
*1: Excluding protrusions, *2: Excluding protrusions, pole clamp and moving range
TERUMO INFUSION PUMP
Product name
TERUFUSION Infusion Pump Type LF
Model
TE-LF600
Flow rate setting range
• Setting range
3.00 to 300.00 mL/h (when setting is 20 drops/mL)
1.00 to 100.00 mL/h (when setting is 60 drops/mL)
• Step
1.00 mL/h step*
*: Step can be used when ow rate is set by the Dial. (It will be 0.00 mL/h when the power is turned on.)
Flow rate accuracy
Within ±10%
(The hourly precision after one hour has passed since the start of solution delivery, in the case where water or a physiological saline solution is used at a constant ow rate of minimum ow rate or more (ambient temperature: 23±2°C) according to IEC 60601-2-24 standard.)
Within ±5%
(The hourly precision after one hour has passed since the start of solution delivery, in the case where water or a physiological saline solution is used with TERUFUSION Solution Administration Set (T_Grav.) at minimum ow rate (20 drops/mL: 3.00 mL/h or 60 drops/mL: 1.00 mL/h) or middle ow rate (25.00 mL/h) (ambient temperature: 23±2°C, drop between infusion bag and pump: 50 cm, and drop between pump main body and puncture site: None) according to IEC 60601-2-24 standard.)
Occlusion detection pressure
• Upper occlusion detection pressure -100 to -30 kPa
• Lower occlusion detection pressure
30 to 120 kPa(set value)
The lower occlusion detection pressure can be set in 10 levels.
Purge ow rate
Approx.300 mL/h or more (depending on the infusion set to be used)
Alarms
Upper Occlusion alarm, Lower Occlusion alarm, Air-in-line alarm, Door alarm, Flow Rate Abnormality alarm, Free Flow alarm, Line Empty alarm, Battery alarm, Re-alarm, Start Reminder, No Flow Rate alarm, No VTBI alarm, Flow Rate/VTBI Volume Judgment alarm, Completion alarm
Safety functions
Occlusion detection pressure select function, Air-in-line alarm sensitivity select function, Tube clamp function, Flow rate range setting function A (Soft limits), Flow rate range setting function B (Hard limits), Key lock function
Use conditions
Ambient temperature: 5 to 40°C*
Relative humidity: 20 to 90%RH (non-condensing)
*: Flow Rate Abnormality alarm may be issued under approx. <10°C at a ow rate of approx. 50mL/h or more when using TERUFUSION Solution Administration Set (T_Grav.).
Storage conditions
Ambient temperature: -20 to 45°C
Relative humidity: 10 to 95%RH (non-condensing)
Power supply
AC100 to 240V, 50 to 60Hz
Internal battery (lithium ion battery)
• Continuous use period: Approx. 5 hours (applies when solution is delivered continuously at 25 mL/h in ambient temperature of
25°C with new fully charged battery)
• Charging time: ≥ 8 hours (when charged with AC power supply with the power turned off)
Power consumption
28VA
Classi cation
Class I equipment and internally powered equipment, type CF applied part, Continuous Operation, IP22 (Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position.)
Dimensions
Without external communication (RS-232C):
253 mm (W)*1 x 120 mm (H)*1 x 102 mm (D)*2
With external communication (RS-232C):
253 mm (W)*1 x 120 mm (H)*1 x 121 mm (D)*2
*1: Excluding protrusions, *2: Excluding protrusions, pole clamp and moving range
Minimum size for maximum performance
Adult, pediatric, and neonatal ventilation
4 h of battery operating time
Independence from gas cylinders or compressors
Integrated high flow oxygen therapy
Noninvasive ventilation
Requiring only a minimum of space, the HAMILTON-C1 combines invasive and noninvasive modes as well as high flow oxygen therapy with maximum mobility. This makes it an ideal companion for all patient groups in the intensive care unit, emergency ward, recovery room or intermediate care, long-term acute care facilities, and during intrahospital transport.
The integrated high-performance turbine enables the HAMILTON-C1 to be completely independent from compressed air. In addition, it provides a peak flow rate of up to 260 l/min, guaranteeing optimal performance even in noninvasive ventilation.
The HAMILTON-C1 includes Hamilton Medical’s standardized Ventilation Cockpit user interface and the unique intelligent ventilation mode, Adaptive Support Ventilation® (ASV®).
Adult, pediatric, and neonatal ventilation
Tidal volumes as low as 2 ml
> 7 h of battery operating time
Independent air supply
Advanced ventilation modes including ASV®
High-performance NIV ventilation
The HAMILTON-C2 mechanical ventilator is a universal ventilation solution for all patient groups. The HAMILTON-C2’s compact design and independence from external power and air supplies allow for maximum mobility throughout the hospital. The integrated high-performance turbine guarantees optimal performance even with noninvasive ventilation.
In the NICU, using the HAMILTON-C2 for volume-targeted ventilation delivers consistent, appropriate tidal volumes as low as 2 ml with the aim of reducing lung damage.
The HAMILTON-C2 provides an extensive monitoring package with a 72-hour trend function.
The HAMILTON-C2 includes Hamilton Medical’s standardized Ventilation Cockpit user interface and the unique intelligent ventilation mode, Adaptive Support Ventilation® (ASV).
On the whole, we are indulged in industry for manufacturing and supplying Steam Autoclaves. Fundamentally, the autoclaves are used for carrying out different kinds of industrial processes, which required elevated temperature and pressure that is unlike from ambient air pressure. Our proposed range is widely used in medical industry, laboratories and other sectors for sterilization purposes. Moreover, the autoclaves are required for sterilizing the rubber products, medical product, microbial culture and different dentistry products. Steam Autoclaves work on the principal of different level of pressure.
Silicone Gel Sheet for Scar Management.
Available in 5 x 5 cm, 10x10cm, 20x20cm and 40x40cm
Also available in customised sizes.
Lysil Silicone Gel Sheet For Scar Treatment
Uni-pro Baby Incubator is designed to meet the safest and most stable environment. This Incubator offers the Advanced Technology and Innovative design to meet the most demanding Neonatal Clinical care need in the NICU. Microprocessor based Temperature controller system provided to control the Air/Skin temperature and it has all Fault Indications with visual alarms.
Uni-pro Radinat warmer is innovatively designed to meet Thermoregulatory designed to meet Thermoregulatory requirements of newborn infants who suffer extremes of heat loss. This attached baby trolley unit can be used in Delivery rooms and NICU. Microprocessor based temperature controller system provided to control the baby body temperature and it has all Fault Indications with visual alarms
Our Laboratory Autoclaves are demanded in different sectors for removing humidity and perform good sterilization. Autoclaves are basically suited to the laboratories applications as these are pressure chamber work on elevated temperature and pressure. Different kinds of glassware, rubber products, surgical instruments and medical devices are treated inside it to remove any kind of moisture and micro organisms. This offered range is suitable for all kinds of liquid, glass and biohazard. Laboratory Autoclaves are available to our clients at cost effective rates.
Electrosurgical suitable for interventions to precision monopolar and bipolar surgery.
SURTRON® 200 is a electrosurgical suitable for interventions to precision monopolar and bipolar surgery.
SURTRON® 200, allows for minimal-invasive surgical treatments of resection, evaporation and coagulation.
SURTRON® 200 through the selection of performances allows pure CUT, cut-coagulation with varying degrees of modulation CUT90% -CUT80% -CUT70% -BLEND, superficial coagulation FORCED COAG, deep coagulation in absence of carbonization ì SOFT COAG and bIPOLAR coagulation. The digital reading of the delivered power and the overseeing through microcontroller of the operational functions, assure the absolute reliability of working conditions.
In the bipolar mode is activated the impedance detection system tissue with automatic activation and deactivation reached dell’avvenuta clotting (AUTOSTART – AUTOSTOP).
SURTRON® 200 allows a highly professional surgery thanks to the ergonomic and safety features. It is continually monitored the connection of neutral electrode and, if a split neutral electrode is used, the impedance of the neutral electrode / patient contact. The possibility of switching functions and control the delivery of power from the electrodes-handle allows the execution of the surgical operation without diverting attention from the surgical field.
Neptune is Medec’s most compact anaesthesia ventilator. It’s a fully equipped system with a powerful bag-in-bottle ventilator, capable of handling a wide range of patient categories: neonates, infants and adults (incl. bariatric patients).
Neptune is designed with the focus on patient safety, reliability and cost efficiency. It comprises some unique safety systems (e.g. VoluProtect® and BaroProtect®), it’s a durable piece of equipment (high-grade materials) and reduces the cost of ownership to a strict minimum (e.g lifetime warranty on the flow sensor).
The straightforward user interface with ergonomically positioned keyboard controls and rotary knob make for smooth sailing throughout the anaesthetic procedure.
Full-featured and durable electrocardiograph with a range of connectivity options
Portable Solution
Compact and lightweight, the ELI™ 250c electrocardiograph provides comprehensive functionality, with 8.5 x 11″ or A4 paper, in an easy-to-use, portable device.
High-resolution color display provides real-time preview of 12-lead ECG and post-acquisition review of acquired ECG.
Widely recognized Mortara resting ECG interpretation algorithm uses gender specific and adult and pediatric criteria to provide a silent second opinion for resting ECG interpretation.
ELI 250c offers a choice of either the innovative WAM™ wireless acquisition module or the AM12™ acquisition module. Both include replaceable lead wires, lead fail indicator, and remote control with buttons for ECG acquisition and rhythm printing.
ELI 250c automatically selects and displays the Best 10 seconds of ECG signal from the five minute segment of internal full disclosure, reducing clinical review time and eliminating the need for repeat ECGs.
Alphanumeric elastomer keyboard features dedicated “one-touch” buttons for ECG acquisition, rhythm printing, and ECG transmission/order retrieval.
The original Defibtech AED includes all mission critical features necessary to provide the most advanced treatment for Sudden Cardiac Arrest. It is so simple and unintimidating to use that even non-medical personnel can effectively save lives.
Simple to Use
Simple, clear and straightforward: there are only two-buttons on the unit, a green button to turn the unit on and a red one to shock the patient, if needed.
Clear Voice Prompts
Saving lives, while rewarding, can be stressful. A calm voice leads the user through the rescue, clearly and concisely stating each instruction, one step at a time. Brightly lit progress lights provide clear visual text guidance to reinforce voice instructions.
Super ability in against electrosurgical interference. Neither in cutting nor in burning, ECG waveform and HR can be influenced, very short recovering time after defibrillation, especially suitable for use in emergency or operating room.
Reviews
There are no reviews yet.