Product name
TERUFUSION Syringe Pump Type SS
model
TE-SS700/TE-SS800
Syringe size
5mL, 10mL, 20mL, 30mL, 50/60mL
Syringe brand
TERUMO or other speci ed brands
Dose mode (*: tE-SS800 only)
• mL/h mode • mg/kg/h mode (*)
• μg/kg/min mode (*) • Library mode (*)
Drug Library (tE-SS800 only)
3,000 Drugs 30 Pro les
flow rate setting range
• Setting range
0.01 to 150.00 mL/h
Note that the upper limit of the ow rate can be changed in the following ranges: 0.01 to 150.00 mL/h (when using syringe of 5 mL)
0.01 to 300.00 mL/h (when using syringe of 10, 20, 30 mL)
0.01 to 1200.00 mL/h (when using syringe of 50/60 mL)
• Step
0.01 mL/h step ( 0.01 to 10.00 mL/h)*
0.10 mL/h step ( 10.00 to 100.00 mL/h)*
1.00 mL/h step ( 100.00 to 1200.00 mL/h)*
*: Step can be used when ow rate is set by the Dial. (It will be 0.00 mL/h when the power is turned on.)
machine accuracy
Within ±1% ( ow rate ≥ 1.00 mL/h)
flow rate accuracy
accuracy including syringe
Within ±3%
(The hourly precision after one hour has passed since the start of infusion at a constant ow rate of 1.00 mL/h or more according to IEC 60601-2-24 standard.)
occlusion detection pressure
10 to 120kPa (set value)
The occlusion detection pressure can be set in 10 levels.
Purge ow rate
• Approx. 150 mL/h (when using syringe of 5mL) • Approx. 500 mL/h (when using syringe of 30mL)
• Approx. 300 mL/h (when using syringe of 10mL) • Approx. 1200 mL/h (when using syringe of 50/60mL)
• Approx. 400 mL/h (when using syringe of 20mL)
alarms
Occlusion alarm, Pressure alarm*1, Nearly Empty alarm, Clutch Displacement alarm, Syringe Barrel Detection alarm, Syringe Displacement alarm, Plunger Displacement alarm, Battery alarm, Re-alarm, Start Reminder, No Flow Rate alarm, No VTBI alarm*2, Flow Rate/VTBI Volume Judgment alarm*2, Completion alarm*2, Link Interruption alarm*1
*1: TE-SS800 only
*2: Only if the VTBI setting function is enabled (Default: disabled)
Safety functions
Remaining volume detection position function, Occlusion detection pressure select function, Bolus reduction function, Flow rate range setting function A (Soft limits), Flow rate range setting function B (Hard limits), Key lock function
use conditions
Ambient temperature: 5 to 40°C
Relative humidity: 20 to 90%RH (non-condensing)
Storage conditions
Ambient temperature: -20 to 45°C
Relative humidity: 10 to 95%RH (non-condensing)
Power supply
AC100 to 240V, 50 to 60Hz
Internal battery (lithium ion battery)
• Continuous use period: Approx. 12 hours (applies when solution is delivered continuously at 5 mL/h in ambient temperature of
25°C with new fully charged battery)
• Charging time: ≥8 hours (when charged with AC power supply with the power turned off)
Power consumption
24VA
classi cation
Class I equipment and internally powered equipment, type CF applied part, Continuous Operation, IP24
Wireless LaN (tE-SS800 only)
Hereby, TERUMO CORPORATION declares that this TERUFUSION Syringe Pump Type SS is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
• Transmit frequency or frequency band: 2412 – 2472 MHz
• Type of modulation and frequency characteristics:
• Differential Binary Phase Shift Keying: DBPSK
• Differential Quadrature Phase Shift Keying: DQPSK • Effective radiated power: 10.7 dBm
• Direct Sequence Spread Spectrum: DSSS • Complementary code keying: CCK
Dimensions
Without external communication (RS-232C):
381 mm (W)*3 x 120 mm (H)*3 x 112 mm (D)*4
With external communication (RS-232C):
381 mm (W)*3 x 120 mm (H)*3 x 131 mm (D)*4
*3: Excluding protrusions, *4: Excluding protrusions, pole clamp and moving range
TERUMO SYRINGE PUMP SS700
Product name
TERUFUSION Syringe Pump Type SS
model
TE-SS700/TE-SS800
Syringe size
5mL, 10mL, 20mL, 30mL, 50/60mL
Syringe brand
TERUMO or other speci ed brands
Dose mode (*: tE-SS800 only)
• mL/h mode • mg/kg/h mode (*)
• μg/kg/min mode (*) • Library mode (*)
Drug Library (tE-SS800 only)
3,000 Drugs 30 Pro les
flow rate setting range
• Setting range
0.01 to 150.00 mL/h
Note that the upper limit of the ow rate can be changed in the following ranges: 0.01 to 150.00 mL/h (when using syringe of 5 mL)
0.01 to 300.00 mL/h (when using syringe of 10, 20, 30 mL)
0.01 to 1200.00 mL/h (when using syringe of 50/60 mL)
• Step
0.01 mL/h step ( 0.01 to 10.00 mL/h)*
0.10 mL/h step ( 10.00 to 100.00 mL/h)*
1.00 mL/h step ( 100.00 to 1200.00 mL/h)*
*: Step can be used when ow rate is set by the Dial. (It will be 0.00 mL/h when the power is turned on.)
machine accuracy
Within ±1% ( ow rate ≥ 1.00 mL/h)
flow rate accuracy
accuracy including syringe
Within ±3%
(The hourly precision after one hour has passed since the start of infusion at a constant ow rate of 1.00 mL/h or more according to IEC 60601-2-24 standard.)
occlusion detection pressure
10 to 120kPa (set value)
The occlusion detection pressure can be set in 10 levels.
Purge ow rate
• Approx. 150 mL/h (when using syringe of 5mL) • Approx. 500 mL/h (when using syringe of 30mL)
• Approx. 300 mL/h (when using syringe of 10mL) • Approx. 1200 mL/h (when using syringe of 50/60mL)
• Approx. 400 mL/h (when using syringe of 20mL)
alarms
Occlusion alarm, Pressure alarm*1, Nearly Empty alarm, Clutch Displacement alarm, Syringe Barrel Detection alarm, Syringe Displacement alarm, Plunger Displacement alarm, Battery alarm, Re-alarm, Start Reminder, No Flow Rate alarm, No VTBI alarm*2, Flow Rate/VTBI Volume Judgment alarm*2, Completion alarm*2, Link Interruption alarm*1
*1: TE-SS800 only
*2: Only if the VTBI setting function is enabled (Default: disabled)
Safety functions
Remaining volume detection position function, Occlusion detection pressure select function, Bolus reduction function, Flow rate range setting function A (Soft limits), Flow rate range setting function B (Hard limits), Key lock function
use conditions
Ambient temperature: 5 to 40°C
Relative humidity: 20 to 90%RH (non-condensing)
Storage conditions
Ambient temperature: -20 to 45°C
Relative humidity: 10 to 95%RH (non-condensing)
Power supply
AC100 to 240V, 50 to 60Hz
Internal battery (lithium ion battery)
• Continuous use period: Approx. 12 hours (applies when solution is delivered continuously at 5 mL/h in ambient temperature of
25°C with new fully charged battery)
• Charging time: ≥8 hours (when charged with AC power supply with the power turned off)
Power consumption
24VA
classi cation
Class I equipment and internally powered equipment, type CF applied part, Continuous Operation, IP24
Wireless LaN (tE-SS800 only)
Hereby, TERUMO CORPORATION declares that this TERUFUSION Syringe Pump Type SS is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
• Transmit frequency or frequency band: 2412 – 2472 MHz
• Type of modulation and frequency characteristics:
• Differential Binary Phase Shift Keying: DBPSK
• Differential Quadrature Phase Shift Keying: DQPSK • Effective radiated power: 10.7 dBm
• Direct Sequence Spread Spectrum: DSSS • Complementary code keying: CCK
Dimensions
Without external communication (RS-232C):
381 mm (W)*3 x 120 mm (H)*3 x 112 mm (D)*4
With external communication (RS-232C):
381 mm (W)*3 x 120 mm (H)*3 x 131 mm (D)*4
*3: Excluding protrusions, *4: Excluding protrusions, pole clamp and moving range
Commonly, Autoclaves are used as pressure chamber meant for carry out numerous industrial processes. The provided range of equipments work on numerous pressures and temperatures that are actually different from ambient air pressure. In most of the medical industry, chemical sector, laboratories and numerous industries for sterilization purposes. The equipments are suitable for treating glassware, rubber products, surgical instruments and medical devices. Designing of Autoclaves is done with precision while making selection of good quality materials.
SURTRON® HP can be used to simultaneously perform monopolar and bipolar surgery in application fields which require high precision and reliability.
Double Activity ‘Operating
Two output channels for monopolar cutting
Two independent setting and output channels for monopolar coagulation more frequently
Controlled Cutting Procedures
Cutting currents intensified for eschar free incision
Cutting current with selectable coagulating property for bleeding controlled dissection
Low capacitive coupling by current endoscopic procedures Slow BLEND
Double Procedures Coagulation Subsidiaries
SPEEDY * Coagulation and Coagulation DEEP ** available to two operators
Spray coagulation obtained with handpiece or
Bipolar cutting current with selectable bleeding control
Cutting current Slow BLEND
Start and Stop automatic coagulation activated separately
Acceptability of the impedance between the patient’s body contact and neutral plate constantly checked electronically dalcontrollo Skin Plate Electronic Control (SPEC)
Continuous radio frequency leakage current monitoring
Change in automatically compensated mains voltage before start of the radio frequency power delivery
Independent choice of coagulation currents and power levels of each of the two operators
Ten configurable personal procedures and immediately recallable
outputs for connections driven argon plasma units and smoke aspirator
Automatic diagnostic control of the actual complete electronic drive functionality and accessories connected and coded report of found failures
* Coagulation SPEEDY is also called Fulgurate or Forced
coagulation ** DEEP is also called Pin Point, or Dessicate Soft
Value without Compromise
Digital PID pressure controlled function
Function in four different modes: CPAP,AUTOCPAP and BiLEVELS which is special to medicraft BiLEVEL device
4 Stage trigger sensibility
Tidal volume display
40 bpm triggering
Graphical monitoring of respiratory curve on display
IPAP – EPAP setting
Inspiration and expiration slope adjustment
4-25 mbar pressure range
Multilanguage menu
Smart 4 button system
Wide graphic LCD Screen
Automatic accessory detection system
Data connection port
Ramp function
Mask test
Clinic menu lock
Automatic start stop
Optional Accessories
Humidifier ( 5 Stagr heater)
Li – lon battery (8 saat)
Cigarette Lighter Adapter
Full-featured and durable electrocardiograph with a range of connectivity options
Portable Solution
Compact and lightweight, the ELI™ 250c electrocardiograph provides comprehensive functionality, with 8.5 x 11″ or A4 paper, in an easy-to-use, portable device.
High-resolution color display provides real-time preview of 12-lead ECG and post-acquisition review of acquired ECG.
Widely recognized Mortara resting ECG interpretation algorithm uses gender specific and adult and pediatric criteria to provide a silent second opinion for resting ECG interpretation.
ELI 250c offers a choice of either the innovative WAM™ wireless acquisition module or the AM12™ acquisition module. Both include replaceable lead wires, lead fail indicator, and remote control with buttons for ECG acquisition and rhythm printing.
ELI 250c automatically selects and displays the Best 10 seconds of ECG signal from the five minute segment of internal full disclosure, reducing clinical review time and eliminating the need for repeat ECGs.
Alphanumeric elastomer keyboard features dedicated “one-touch” buttons for ECG acquisition, rhythm printing, and ECG transmission/order retrieval.
Minimum size for maximum performance
Adult, pediatric, and neonatal ventilation
4 h of battery operating time
Independence from gas cylinders or compressors
Integrated high flow oxygen therapy
Noninvasive ventilation
Requiring only a minimum of space, the HAMILTON-C1 combines invasive and noninvasive modes as well as high flow oxygen therapy with maximum mobility. This makes it an ideal companion for all patient groups in the intensive care unit, emergency ward, recovery room or intermediate care, long-term acute care facilities, and during intrahospital transport.
The integrated high-performance turbine enables the HAMILTON-C1 to be completely independent from compressed air. In addition, it provides a peak flow rate of up to 260 l/min, guaranteeing optimal performance even in noninvasive ventilation.
The HAMILTON-C1 includes Hamilton Medical’s standardized Ventilation Cockpit user interface and the unique intelligent ventilation mode, Adaptive Support Ventilation® (ASV®).
We have obtained immense goodwill in the market by manufacturing, exporting and supplying a wide assortment of Hospital Autoclaves. Admired to its power efficiency, these autoclaves are used for sterilization of medical equipments. Offered autoclaves are manufactured under the supervision of ingenious professionals with aid of quality tested components and advanced techniques. Moreover, the provided Hospital Autoclaves can be purchased from us at competitive prices .
The HAMILTON-C1 neo is a versatile neonatal ventilator that combines invasive and noninvasive modes with the additional options of nCPAP and high flow oxygen therapy. The integrated turbine allows it to be operated independently of a compressed air supply. Due to its compact design, it is an ideal companion for your smallest patients in various environments such as delivery room, the intensive care unit and emergency ward, as well as during intrahospital transport.
Super ability in against electrosurgical interference. Neither in cutting nor in burning, ECG waveform and HR can be influenced, very short recovering time after defibrillation, especially suitable for use in emergency or operating room.
Six – Channel
Six – channel ECG machines are capable of recording all 12 leads simultanoeusly and displays any 6 leads at a time.BPL’s offerings include Cardioline ar1200view and Cardioline 100 , equiped with Glasgow Algorithm. We have a wide range of ECG machines including Single-Channel,…
RESCUE Life
General Specifications
Capacity 100 shocks at 230J with battery fully charged
Software Voice and texts multilanguage
Memory Internal flash 2 Gb up to 300 hrs of ECG data, events and usage review
AC 100-240 VAC, 50/60 Hz
Defibrillation
Waveform Bipashic Truncated Exponential (BTE)
HiCAP technology (Large storage capacitor)
Manual mode
ECG Monitoring
Display high contrast TFT color LCD 5.7″ (320 x 240 pixels)
Operational information, ECG traces, Spo2 value,
parameters, Heart Rate indicator, filters, alarms and battery status
Printer
Type Integrated thermal printer for ECG traces and events
documentation hardcopy including HR/SpO2 values
Options (not included)
– External pacemaker
– SPO2
– AED mode
Standards & Safety
Standard IEC 60601-2-4; IEC 60601-1; IEC 60601-1-2, Class II, type BF
CE Mark EEC 93/42 Medical device, class IIb
Caelus Lite is an ideal solution for optimal space allocation in your operating room. Its reduced footprint combined with the integrated working surface results in a remarkably compact anaesthesia ventilator. At the same time its cutting-edge technology makes for a modular platform, which can be upgraded to support the most demanding anaesthetic procedures.
The innovative PureTouch® user interface and the 18.5” touchscreen expedite the workflow through an unprecedented user-friendliness. Advanced ventilation modes such as PRVC or VVV are available in an optional software package, as well as gas analysis and monitoring the depth of anaesthesia (qCON – qNOX module).
Adult, pediatric, and neonatal ventilation
Tidal volumes as low as 2 ml
> 7 h of battery operating time
Independent air supply
Advanced ventilation modes including ASV®
High-performance NIV ventilation
The HAMILTON-C2 mechanical ventilator is a universal ventilation solution for all patient groups. The HAMILTON-C2’s compact design and independence from external power and air supplies allow for maximum mobility throughout the hospital. The integrated high-performance turbine guarantees optimal performance even with noninvasive ventilation.
In the NICU, using the HAMILTON-C2 for volume-targeted ventilation delivers consistent, appropriate tidal volumes as low as 2 ml with the aim of reducing lung damage.
The HAMILTON-C2 provides an extensive monitoring package with a 72-hour trend function.
The HAMILTON-C2 includes Hamilton Medical’s standardized Ventilation Cockpit user interface and the unique intelligent ventilation mode, Adaptive Support Ventilation® (ASV).